The Hitachi UC3SFL Lithium-Ion 3.6 Volt EBM3 Series Battery Charger is designed to recharge the Hitachi EBM315 HXP Battery. It is important to fully charge your battery before attempting to use it in your power tools. To use your UC3SFL charger properly, connect the charger power cord to the base and then insert the battery into the charger. Position the battery so that the nameplate faces toward the nameplate of the charger and press the battery into place until it comes into full contact with the bottom plate. Inserting the battery turns the charger on, and the pilot lamp should light up. If the pilot lamp does not light up, pull out the power cord from the base and check the battery mounting condition. Once your battery is fully charged, the pilot lamp goes off and you're battery is ready to use. In general, the UC3SFL should charge your battery in approximately 30 minutes. Although the variation is minor, ambient temperature above or below room temperature may effect recharging time.
Product Description
Hitachi UC3SFL 3.6-Volt Lithium-Ion EBM3-Series Battery Charger
Product Details
- Amazon Sales Rank: #97075 in Home Improvement
- Brand: Hitachi
- Model: UC3SFL
- Number of items: 1
- Dimensions: 3.90" h x 10.60" w x .0" l,
Features
- 1.5-AMP/HR
- 30 Minute charge time
- Max torque of DB3DL is 44-Inch/Pound
- This charger is a 3.6-volt Lithium-Ion EBM3-Series Battery Charger
- Charges batteries in 40 to 90-minutes
- Comes with a 1-year limited warranty
- Compatible with other 3.6-volt batteries
